Home Downloads Contact	SteriCans™   Stericans™ are high quality vessels that have been developed as part of a system for the safe storage and transport of vaccines, sterile liquids and other high value liquid products. SteriCans™ are specifically designed and constructed to ensure that they meet the exacting standards of the pharmaceutical and bio-processing industries. For full product information download the brochure. Cross section through a SteriCan™   Top Section Provides a sealed container around the inner lid The outer lid hermetically seals by means of a clampband Lid is shown with a standard arrangement of Filling Tube, Discharge Tube & Vent. Other arrangements are available on request Outer Lid is domed for additional strength and to aid drainage during cleaning Designed to provide a storage area & protection for flexible hose and lid fittings Body Crevice free construction 200mm diameter aperture for easy cleaning & inspection Inner lid secured with clampband All welds are Dye Penetrant tested to ensure that they are 100% crack free Base of the body has a special dimple to aid maximum drainage Base Robust to take the rigours of everyday use. The Base is curled inwards to give a large, stable standing area and to prevent floor marking. Two base styles are available. One style allows the vessels to be stacked the other design prevents stacking. The base is designed to be free draining when the vessel is washed in the inverted position Base ring acts as a crumple zone to prevent damage to the Main Body if the container is dropped Cross section Top Rim Design   The Top Rim of the container is frequently handled by operators. It is vital that this area is designed to be as clean as possible. SteriCans have a solid top rim. The underside to the rim is filled with weld and is then polished smooth. The result is a very strong and easily cleaned top rim. Stericans do not have an unhygienic rolled rim as it is a potential source of biological and chemical cross contamination Design Documentation   Every SteriCan is supplied with a comprehensive documentation package for validation. A standard package will include the documents described below. Customised documentation packages are available on request Vessel Marking   SteriCans are individually numbered so that they can be easily identified. We will be pleased to add any customer specific information. Sterilisation SteriCans are designed for either dry heat or autoclave sterilisation. Marking SteriCan Trolley   Specially designed for use with SteriCans Reduce manual handling when moving SteriCans 4 wheel steering 2 wheels fitted with brakes Non-marking wheels Custom models available Technical Details     Product Contact Parts: • Metallic - 316L stainless steel • Non metallic - Silicone rubber (FDA) acceptable grade • Other materials available on request ............................................................... Non-Product Contact Parts: • Metallic - 304 stainless steel • Non metallic - Silicone rubber (FDA) acceptable grade • Other materials available on request ............................................................... Finish: • Electropolished inside and out • Internal - 0.25µm Ra* • External - Centre Section - 0.5µm Ra* • External - Upper & Lower Sections - Beadblast finish* ............................................................... Welds: • All welds ground and polished ............................................................... Pressure: • Maximum working pressure 0.5barg   ............................................................... * This is the finish achieved before the vessel is electropolished. Other finishes are available on request. ............................................................... Dimensions   SteriCan-25 SteriCan-50 SteriCan-100 Part Number: SC25 SC50 SC100 Nominal Volume: 25 litres 50 litres 100 litres Brimful Volume: 27.5 litres 55 litres 110 Litres Weight (approx.): 20 kg 25kg 45kg Overall Height (A): 500mm 620mm 860mm Internal Diameter of vessel body (B): 300mm 400mm 500mm Max Diameter over Lid & Clampband (C): 340mm 440mm 540mm Internal Lid Diameter (D): 300mm 400mm 500mm Base Diameter - Stacking type (E): 290mm 390mm 490mm Base Diameter - Non-stacking type (E): 320mm 420mm 520mm Outer Diameter of Tubes (X, Y & Z): 10mm 10mm 10mm Inner Diameter of Tubes (X, Y & Z): 7mm 7mm 7mm Other sizes are available on request - these sizes will be based on one of the standard diameters above Due to our policy of continual improvement specifications may be liable to change without notice. Contact Pharmatech for prices and for confirmation of the specification. Sterican™ Drop Test   Have confidence when transporting your valuable products. SteriCans™ have been successfully drop tested in accordance with UN and DOT specifications. Contact us for full details of our test procedures and results. SteriCans™ are containers that you can rely upon. For full product information download the brochure. Dropped Sterican Base Ring of a SteriCan after impact from a height of 1.8m. Base Ring crumpled to absorb the impact and the SteriCan did not leak. Sitemap
Website design, photography & text 2005-2008 Pharmatech Ltd, unless stated otherwise. Multiblend™, Flexisieve™ & Flexicone™ are ™ Pharmatech 2005-2008. All Rights Reserved. Reproduction Prohibited unless prior permission is granted in writing.